When it comes to kids, sunglasses in summer are like mittens in winter - always missing when you need them! Where do they disappear to?!
We decided to fix this with a fun, light-weight silicone bead sunglasses strand!
We would suggest using our smallest 9mm bead size for this tutorial, but there’s so much you could do to personalize these strands! Color coordinated beads not enough? Throw on an accent bead here and there, and you’ve got the cutest sunglasses strands on the market! Use our letter beads to easily identify them by name! They are also perfect for summer months as they can get wet in the pool and are easy to wash if they get covered in sand!
Supplies Needed:
- Scissors
- Lighter
- 1 x 72” cut length of cord (find our cord here)
- 9mm beads (approximately 45 for a knotted style, and approximately 60 for a regular style)
- Pair of sunglasses
Step-by-Step Instructions:
1. Taking your length of cording, fold the end down and tie a loop knot. Keep the knot un-tightened. Slip the open loop on to the sunglasses' arm.
2. To make sure your knot doesn’t slip off, the best kind of sunglasses to use are ones that taper at the corner, and widen by the ear.
3. Once your knot is on the arm, slide it towards the front corner of the arm and tighten the knot up against the arm.
4. Trim the excess short piece of string near the knot and then slightly melt that string end with your lighter to keep it from fraying. Also slightly melt the end of the longer piece of string onto which you will be threading your beads.
5. Slide on your first bead and bring it all the way up to the knot on the sunglasses' arm. Tuck the short trimmed string end into the hole to hide it and push the bead up against the knot.
6. If you are planning to do a knotted style, carefully loop a small single knot directly beneath the first bead. If you would like to make a regular style, thread all your beads (about 60) and skip to step 8.
7. Continue a pattern of bead, knot, bead, knot, etc. We used about 45 beads.
8. Once the strand is as long as you prefer, fold the end over and create another loop knot.
9. Slip the knot onto the opposite arm of the sunglasses. Tighten in the appropriate spot. Trim the excess string and melt the end with your lighter. Tuck the small end into the last bead hole to hide it. Voila!! Super cute, functional summer accessory!
We loved seeing our littles all dolled up in their sunglasses strands - tag us if you make some for your kids! #createdwithcarasupply
Happy Crafting!
xo
- the girls
**The products, materials, and supplies sold by Cara & Co. Silicone Craft Supply are intended for use by adults and should never be left unattended with a child.
***Small objects and beads can present choking hazards to young children. Never leave a child unattended with beads or other products. Always dispose of any damaged product. No product is completely indestructible, and fully formed teeth could potentially damage product if chewed aggressively, so responsible attentiveness is needed for any user or purchaser. Customers should always inspect and monitor their products, discontinuing use at the first sight of damage.
****Once our products have been sold and shipped to our customers, Cara & Co Silicone Craft Supply Inc., waives all responsibility and liability from the use of our products. Customers are responsible that their final products made from our supplies meet the appropriate safety requirements for their region. Our buyers understand that by purchasing our products or using suggestions from the above tutorial, the buyer assumes any and all responsibility and liability for the use of the products.
*****Cords, clasps and pacifier clips are not intended to be chewed on and may present choking hazards.